3 Ton LPG Gasoline Diesel Japan Engine Forklift
Details of 3 Ton LPG Gasoline Japan Engine Forklift:
Japan NISSAN K25 Engine;
Japan SHIMADZU Hydraulic System(including pumps and valves and oil pipes);
Standard 2-stage 3m mast;
Electric Hydraulic Automatic Transmission by TCM technology;
Lamp protection;
Triangle wide view back mirror;
Waterproof overhead guard;
Backing buzzer and warning light;
Double front Pneumatic Tires
Common Options of 3 Ton LPG Gasoline Japan Engine Forklift:
Solid Tires;
3m-7m duplex or triplex full free mast;
Attachments such as paper roll clamp, block clamp, bale clamp, bucket, etc;
Fully closed cabin with heater or air conditioner;
Side shifter and fork positioner;
Fully suspension luxury seat;
Double filter;
High exhaust;
Customized color except green, red and orange.
New finished 3ton LPG&Gasoline forklift with Nissan engine K25, triplex 4.5meters full free lift mast, paper roll clamp will be sent to Armenia. We are dedicated to providing forklift VIP solution to meet all kinds of work condition which means SNSC forklift can be customized. 
Specifications of 3 Ton LPG Gasoline Japan Engine Forklift:
| Specifications | Unit | FL30 |
| Features | Power type | | | LP/Gasoline |
| Rated load | | kg | 3000 |
| Load center | | mm | 500 |
| Lifting height | | mm | 3000 |
| Free lifting height | | mm | 145 |
| Fork size | L*W*T | mm | 1070*125*45 |
| Mast tilt angle | Front/Rear | . | 6/12 |
| Min. turning radius | | mm | 2400 |
| Min.ground clearance | Mast | mm | 120 |
| Overhead guard height | | mm | 2090 |
| Front overhang | | mm | 475 |
| Performance | Max. travelling speed | loaded | km/h | 20 |
| Max. lifting speed | loaded | mm/s | 470 |
| Max. traction force | loaded | KN | 18 |
| Max. climbing ability | | % | 20 |
| Dimension | Overall length | without fork | mm | 2695 |
| Overall width | | mm | 1230 |
| Mast lowered height | | mm | 2055 |
| Mast extended height | | mm | 4265 |
| Chassis | Tyre | Front | | 28*9-15-12PR |
| Rear | | 6.50-10-10PR |
| Wheel base | | mm | 1700 |
| Wheel thread | Front/Rear | mm | 1000/970 |
| Weight(without load) | | kg | 4350 |
| Powertrain | Battery | | V/AH | 12/90 |
| Engine | Model | | nissan K25 |
| Rated power | km/r.p.m | 37.4/2300 |
| Rated torque | Nm/r.p.m | 176.5/1600 |
| No. cylinder | | 4 |
| Bore x stroke | mm | 89X100 |
| Displacement | | L | 2.488 |
| Fuel tank capacity | | L | 70 |
| Transmission/shift | | | 1/1 automatic transmission |
| Operation pressure | | Mpa | 17.5 |
Detailed images of 3 Ton LPG Gasoline Japan Engine Forklift:
One 20ft container can hod 2 units, one 40ft container can hold 4units.
Our factory has 4 modern production workshops, has more than 100 sets international leading level of the large and medium-sized equipments, world's advanced research facilities, intelligent detection system. Our forklifts got certifications of ISO 9001, CE, EPA, GOST and so on. At present, it has formed three categories including internal combustion, electric, and storage, a total of 209 models of forklift products. Our products have been widely used in paper making, automobile, tobacco, logistics, stone material and other industries.
Forklift Catalogue: Diesel Forklift capacity is from 1.5 ton diesel forklift to 10 ton diesel forklift;
(FD15/FD20/FD25/FD30/FD35/FD40/FD45/FD50/FD60/FD70/FD80/FD100)
Electric Forklift capacity is from 1.5ton battery forklift to 3.5ton battery forklift;
(FB15/FB20/FB25/FB30/FB35)
LPG&Gasoline Forklift capacity is from 1.5ton LPG forklift to 3.5ton LPG forklift;
(FL15/FL20/FL25/FL30/FL35)
Wearhouse material handling equipments include Electric Pallet Truck (TB)/Electric Stacker(DB)/ Electric Reach Truck(YB)/Electric Tractor(QB).
Our factory was established in 2010, covering area of 130,000 square meters, has more than 400 employees. Among them, there are nearly 80 engineers, 60 office staff and 300 front-line workers. The annual output is 10,000 sets forklifts, the daily output is 40 units, and the export volume is 3,000 units. Our products have been exported to more than 130 countries and areas such as UK, France, Spain, Russia, Australia, USA, Mexico, South America, Southeast Asia, Middle East, Africa, etc
We regarde "Quality product, reasonable price, efficient production time and good after-sale servie" as our tenet." 
Your satisfaction is our terminal goal, SNSC beyond your needs. 
We hope to cooperate with more customers for mutual development and benifits. Welcome to contact Winni for more details. We'll supply you our best offer.
